manualshive.com logo in svg

Taiwan Commate Computer Inc. S630MA, Quick Installation

Share
Download
Taiwan Commate Computer Inc. S630MA Quick Installation Download Page 9

ATXPWR         ATX Power Connector
CPUFAN          CPU fan connector
SYSFAN          Chassis fan connector
JIR                    Infrared Connector ( Cable optional )
FLOPPY          Floppy Disk Drive Connector
IDE1, 2             Primary/ Secondary IDE Connectors
MS                    PS/2 Mouse Port
KB                     PS/2 Keyboard Connector
VGA                 VGA output Connector

COM1,COM2

      Serial Ports 1 & 2

LPT                   Printer Port
USB                  USB Connector
LAN                  LAN Connector
GP1                   Game/MIDI Connectors 
LINE_OUT       Line out Connector
LINE_IN           Line in Connector
MIC                  Microphone in Connector 
SONY              The Connector for IDE/Sony CD-ROM audio in

2.4.1 ATX Power Connector (20-pin ATXPWR)

Make sure that the power supply is off before connecting or disconnecting the power cable.

2.4.2 CPU, Chassis Fan Connector (3-pin CPUFAN, SYSFAN)

Connect the fan's plug to the board taking into consideration the polarity of the connector.

2.4.3 Infrared Connector (10-pin JIR)

　

This  connector  supports  the  optional  wireless  transmitting  and  receiving  infrared  module,  with  this  module  and
application  software  such  as  Laplink  or Win95  Direct  Cable  Connection,  user  can  transfer  files  to  or  from  their
laptops,  notebooks,  PDA,  PCs  and  printers.  The  connector  supports  IrDA  (115.2Kbps,  2  meters)  and  ASK-IR
(56Kbps). An  optional  consumer  infrared  (CIR)  set  connects  to  the  CIR  and  SIR  connectors  simultaneously  for
both  wireless  transmitting  and  remote  control  functions  through  one  external  infrared  module.  Install  infrared

Summary of Contents for S630MA






























Reviews:

No comments

Brands by name

Popular brands

Load more brands