The onboard hardware monitor is able to detect the voltage output by the voltage regulators. These values
refresh upon any key entry. The function is optional.
3.8.2 Current CPU & System Temperature (xx
°
C)
The onboard hardware monitor is able to detect the temperatures of motherboard and CPU. These values
refresh upon any key entry. The function is optional.
3.8.3 CPUFAN & ChassisFAN Speed (xxxxRPM)
The onboard hardware monitor is able to detect chassis fan speed, CPU fan speed in Rotations Per Minute
(RPM). These values refresh upon any key entry in the BIOS setup screen.
3.9 Frequency Control
Figure 3.9
Frequency Control
CMOS Setup Utility - Copyright ( C ) 1984 - 2000 Award Software
Frequency Control
Auto Detect DIMM/PCI Clk
Enabled
Item Help
CPU Clock Ratio Jumpless
By H/W
Menu Level >
¯
®
¬
: Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Value F6 : Fail-Safe Defaults F7 : Optimized Defaults
3.9.1 Auto Detect DIMM/PCI CLK
If you have the EMI issue, set the option as Enabled, it keeps its interference under control.
3.9.2 CPU Clock Ratio Jumpless
Use
CPU Clock Ratio
to set a multiple. The multiple times the system bus must equal the core speed of the
installed processor e.g.
3.5 (multiple) x 100 MHz (system bus) = 350 MHz (installed processor clock
speed)
. We recommend that you leave the item to there default value By H/W (Hardware defined).
3.10 Load Fail-Safe Defaults
This loads the troubleshooting default values permanently stored in the ROM chips. These settings are not optimal and
turn off all high performance features. You should use these values only if you have hardware problems. Highlight this
option in the main menu and press <Enter>. The message below will appear.
Load Fail-Safe Defaults (Y/N)?N
If you want to process, type <Y> and press <Enter>. The default settings will be loaded.
3.11 Load Optimized Defaults
This feature loads optimized setting from the BIOS ROM. Use the default values as standard values for your system.
Highlight this option in the main menu and press <Enter>. The message below will appear.
Load Optimized Defaults (Y/N)?N
Type <Y> and press <Enter> to load the Setup default values.
