14
System Operation
Midian Encryption Programming and Service Manual
June 2006 © Tait Electronics Limited
1.1
Configuration
Both encryption modules and radios have many settings which affect
encryption. Refer to the module manufacturer’s installation and
programming manuals provided with your encryption hardware.
This manual describes how to connect your hardware for setup, testing and
maintenance, but does not describe how to determine the settings you
should use. These are determined during system design by technical
personnel trained in the relevant Tait and third-party products.
Contact your Authorised Tait Service Centre for further assistance.
1.2
Compatibility
Some combinations of encryption hardware, software, radio versions and
configurations, accessories and programmable features may not be
supported. In particular:
■
encryption modules from different manufacturers are not compatible
■
features available in a Tait encryption-enabled radio are not necessarily
the full list of features specified by the module manufacturer.
1.3
Encrypted Radio Programming and Service Kit
This manual forms a part of the TOPA-EA-003 Tait Encrypted Radio
Programming and Service Kit. The kit provides service centres and large
users of Tait encrypted radios with all cables and information required to set
up, manage and maintain a fleet of encrypted TOP and/or TM8000 Mobile
radios.
The programming and service kit TOPA-EA-003 (KIT Midian KL3 Prog
+ cables)
contains the following items:
■
Midian Encryption for Tait TOP and TM8000 Radios Operation and
Service Manual (IPN MAS-02434-MD-0X) - this manual - also
available separately
■
TOP Programming Cable (IPN 219-02931-0X) to connect Midian KL3
programmer to radio for programming
■
TM8000 Programming Cable (IPN 219-03026-0X) to connect Midian
KL3 programmer to radio for programming
■
Midian KL3 programmer and software kit (IPN 005-00021-0X)
