Operating in conventional mode 39
Making calls
To make a call:
1
Select the required zone (see
).
2
Select the required channel (see
3
Lift the microphone off the microphone clip.
4
Hold the microphone about 2 inches (5 cm) from
your mouth and press the PTT key to transmit.
Note:
If the channel is busy, you may not be able to
transmit. Wait until the green status LED has
stopped glowing, and then try again.
5
Speak clearly into the microphone and release the
PTT key when you have finished talking.
While you are transmitting the red LED glows and
or
appears in the display.
6
Finish your conversation as soon as possible and
release the PTT key. For a short time, your radio may
prevent you from making a call.
Making an individual call
Note:
This feature is available for digital channels only.
To make a call to one person rather than a group of
people:
1
Press
Menu
and select
Individual call
. (The person
to whom you last made an individual call is
highlighted.)
(Depending on how your radio is programmed, you
may be able to press a function key or use your
Quick Access menu to select individual calls.)
Channel 1
Zone 11
Menu
Cancel
Summary of Contents for TM9100
