background image

8

Environmental responsibilities

Tait Limited is an environmentally responsible company 
which supports waste minimization, material recovery and 
restrictions in the use of hazardous materials. 
The European Union’s Waste Electrical and Electronic 
Equipment (WEEE) Directive requires that this product be 
disposed of separately from the general waste stream when 
its service life is over. For more information about how to 
dispose of your unwanted Tait product, visit the Tait WEEE 
website at 

www.taitradio.com/weee

. Please be 

environmentally responsible and dispose through the original 
supplier, or contact Tait Limited.
Tait Limited also complies with the Restriction of the Use of 
Certain Hazardous Substances in Electrical and Electronic 
Equipment (RoHS) Directive in the European Union.
In China, we comply with the Measures for Administration of 
the Pollution Control of Electronic Information Products. We 
will comply with environmental requirements in other 
markets as they are introduced.

About this guide

This user’s guide provides information about the TM8260 
mobile radio. The radio behaviour described in this guide 
applies to radios with firmware version 6.0x and higher when 
used in a dual radio system. If you need further assistance or 
your radio does not operate as you expect, contact your 
radio provider.
For information about how to install your TM8260 radio 
system, go to 

http://support.taitradio.com

Summary of Contents for TM8260












































































Reviews: