Tait TM8260 Page 26 User Manual Download

Page: 26 / 75

Getting started 27

Navigating your radio’s menus

Your radio has a number of menus available, each containing
lists or submenus. The menus available will depend on the
way your radio is programmed.

Using the Main menu

Whenever

Menu

appears above the

right selection key

, you are

able to open the Main menu
by pressing .

Use the scroll keys

move through the list of menus.
When the menu you want is
highlighted, press

Select

to open

the menu you have chosen.

Using the scroll key Quick Access menu

Your radio may be programmed so that your scroll keys act as
a shortcut to a frequently used menu. To go to this Quick
Access menu, press a scroll key

, and the Quick

Access menu appears.
For example, if your Channels menu
is your Quick Access menu, press a
scroll key

to go directly

to the Channels menu.

The Channels menu, with a list of
your available channels and scan
groups, is now displayed.

Channel 1

Main menu

Channels

Zones

Back

Select

Channel 9

Channels

Channel 9

Scan 1

Cancel

Done

Summary of Contents for TM8260












































































Search results

Summary of Contents for TM8260

Reviews:

Related manuals for TM8260

Brands by name

Popular brands

Tait TM8260, User Manual

Search results

Summary of Contents for TM8260

Reviews:

Related manuals for TM8260

Brands by name

Popular brands