Tainet T-288C, User Manual

Page: 117 / 131

A2-6 S-REGISTER TABLE FOR T-1496 & T-1496terbo
S-Register Table (cont.)
NO. UNIT DEFAULT FUNCTION
28 60 Minute Timer For Leased Restore
(2)
bit 2 * 0 DRL0 DTE RDL disable
bit 3 * 0 DAL0 DTE AL disable
1 \G1 ........................... control ON
00 \K0 Break option 0
* 10 \K2 .................... 2
11 \K3 .................... 3
bit 5 * 0 N0 DCE protocol by DTE speed
29 00000010 Binary
bit 0 * 0 Fallback & Fall forward disable
1 ..................................... enable
bit 1 0 &T5 RDL grant off
* 1 &T4 ................ on
1 DRL1 ................ enable
1 DAL1 ................enable
bit 4 * 0 DFB0 Secondary channel off
1 DFB1 ..............................on
bit 5 * 0 DT Tone Dial
1 DP Pulse Dial
bit 6 * 0 Echo protect tone Off
1 Echo protect tone On
bit 7 Reserved
30 01101010 -dBm
(106) bit 4,3,2,1,0 Leased line TX level (from 0..31)
bit 7,6,5 Dial line TX level (from 0..-15)
31 00010000 Binary
(50) bit 1,0 00 \Q0 Flow control none
01 \Q1 .............. xon/xoff
* 10 \Q2 ............ RTS/CTS
11 \Q3 ........ CTS only
bit 2 * 0 \G0 DCE-DCE Flow control OFF
bit 4,3
01 \K1 .................... 1
1 N1 BY MODEM negotiation
bit 6 * 0 \B0 Not send break sequence
1 \B1 Send break sequence
bit 7 * 0 \X0 not pass through
\X1 XON/XOFF pass through