background image

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.

The lightning flash with arrowhead
symbol, within an equilateral trian-
gle, is intended to alert the user to
the presence of uninsulated "dan-
gerous voltage" within the prod-
uct's enclosure that may be of suf-
ficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and mainte-
nance (servicing) instructions in
the literature accompanying the
appliance.

The serial number of this product may be found on
the bottom of the unit.
You should note the serial number of this unit in
the space provided and retain this book as a per-
manent record of your purchase to aid identifica-
tion in the event of theft.

Model No.

Serial No.

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SA 1965

SA 1966

Caution:

Before attempting to connect or operate this
product, please read the label on the bottom.

Introduction .................................................... 1
Use ................................................................. 1
Names of Parts  .............................................. 2
Inspection and Preparation Before Use  ......... 4
Instructions for Use  ........................................ 7

After Use  ...................................................... 12
After-Sales Service  ...................................... 14
Specifications ............................................... 15

Contents

Summary of Contents for TSK-110A





















Reviews: