TaiDoc L1, Owner'S Manual

Page: 15 / 31

8
QUALITY CONTROL TESTING
When Should the Control Solution Test be
Performed?
 if it is mandatory following the local regulations in your country,
 if you suspect the meter or test strips are not working properly,
 if your lactate test results are not consistent with how you feel, or if
you think the results are not accurate,
 to practice the testing process, or
 if you have dropped or think you may have damaged the meter.
Test strips (e) , control solutions (f) , lancing device (g) or sterile
lancets may not be included in the kit (please check the contents on
your product box). They can be purchased separately. Please make
sure you have those items needed for a lactate test beforehand.
Performing a Control Solution Test
To perform a control solution test, you will need: (d) , (e) and (f) .
When the meter is off, you can enter the measuring mode by
two ways:
1. Insert the test strip to turn on the meter
Insert the test strip into the meter. Wait for the meter to display
the initiating animation. Or,
Press M to turn on the meter
Select the measuring mode. Press M to enter. Insert a test strip
when the meter displays test strip inserting animation. Wait for
the meter to display the initiating animation.