TaiDoc L1, Owner'S Manual

Page: 12 / 31

5
3. Setting the time format
Press ▲
or
▼ to select the desired time format --- 12h or 24h.
Press M .
4. Setting the time
The sequence of the time setting is: HOUR
→
MINUTE.
Press ▲ or ▼ until the correct hour / minute appears. Press M .
The meter displays the complete time and “Time is set” message.
5. Deleting the memory
To delete all the results, press ▲ or ▼ to switch to ”yes” and
press M . The meter displays “Memory cleared” which indicates
that all data stored is deleted.
Congratulations! You have completed all settings!
NOTE:
 These parameters can ONLY be changed in the setting mode.
 If the meter is idle for 3 minutes during the setting mode, it will switch off
automatically.