TaiDoc L1, Owner'S Manual

Page: 14 / 31

7
How to Code Your Meter
1. Insert the code chip when the monitor is off. Wait until the number
appears on the display. (b)
NOTE:
Make sure the number on display, code chip, and test strip vial (or individual
foil package) are the same.
2. Remove the code chip, the display will show “OFF”. This tells you
that the meter has been updated and is ready for measurement.
Checking the Code Number
You need to make sure that the code number displayed on the meter
matches the number on the test strip vial or box of foil package
before you proceed
(b) . If it matches, you can proceed with your test.
If the codes do not match, please stop testing and contact Customer
Service for help.
NOTICE:
The code number on the display from picture (b) is only for your
reference, it may not be an actual code for this meter.
WARNING:
 It is important to make sure that the LCD displayed code is the same as the
code on the test strip vial or box of foil package before testing. Failure to do
so will get inaccurate results.
 If the LCD displayed code is not the same as the code on the test strip vial
or box of foil package, and the code number cannot be updated, please
contact Customer Service for assistance.