TaiDoc KIPTRACK 2 in1, Owner'S Manual, Page: 42 / 64

41
Step 2.
Recall test results.
After 90-day average, the
will be displayed in the order
of time and date taken. You
will see the number of the result
stored, followed by the result.
When the memory is full, the old-
est results are deleted as new ones
are added.
Step 3.
Exit the memory mode.
Press the button to turn off the monitor and exit the memory
mode.
NOTE
The control solution results are 1. NOT stored in the memory.
The list of result average in the memory are for blood glucose
only.
If you’d like to exit from the memory, press the
2.
button to turn
off the monitor or wait without pressing for 3 minutes for auto-
shut down.
“Blood Pressure Results”
“ ”
“ ”
KIPTRACK
42
Step 1.
Obtaining the required cable and installing the
software
To download
Pro), please visit RapidCheck's website
www.rapidcheckng.com/kiptrack
Step 2.
Connecting to a personal computer
Connect the cable to an RS232 port on your computer. With
the monitor switched off, connect the other end of the
RS232 interface cable to the monitor data port. “PCL” will
appear on the monitor display, indicating that the monitor is
in communication mode.
Step 3.
Data transmission
To transmit data, follow the instructions provided with the
software. Results will be transmitted with date and time.
If you remove the cable, the monitor will automatically
switch off.
NOTE
While the meter is connected to the PC, it will not be able to
perform a test.
Kiptrack Software System (Kiptrack PC Link
You can use the monitor with an RS232 interface cable and
Kiptrack Software System (Kiptrack PC Link Pro) to view
test results on your personal computer. To learn more
about Kiptrack Software System (Kiptrack PC Link Pro) or
to obtain an RS232 interface cable separately, please
contact the local customer services or place of purchase for
assistance.
DOWNLOADING RESULTS ONTO A
COMPUTER
Data Transmission Via Cable