TaiDoc KIPTRACK 2 in1, Owner'S Manual, Page: 32 / 64

33
STEP 5.
Obtain an accurate result in 7 seconds.
The result of your blood glucose test is shown after
the monitor counts to 0. This reading is automatically
stored in
the monitor.
STEP 6.
Remove the lancet.
Remove the lancing device cap and the lancet.
Place the disk on a hard surface and push the
exposed needle tip into the protective disk. Always
use
caution when removing the lancet.
WARNING
The used lancet and the used test strip may be potentially biohazardous. Please discard
them carefully according to your local regulations.