Network Setting:
Setting the IP address, netmask and gateway,
reboot the device after setting. Click the DHCP
can be get automatically.
Apply:
apply the setting
Set Default:
default the device. Switch the AFC 4
times in 5 seconds can default the device as well.
8. USB link
TES-5680M interactive recording and webcasting audio system has a built-in USB LINK (2 channels, 16bit, 48kHz) which
can be connected to the computer through USB cable (software requirement: Win7 or higher) for digital audio
input/output. Cooperating with the TES-560x microphone can realize remote control PPT slide. In the following we take
Win7 system as an example to introduce the function and operation of the USB LINK.
(1) Connect to PC
The TES-5680/81BX connects to the computer; the TES-5680 USB LINK will be detected automatically. If it is connected
for the first time, the USB device driver will be recognized and installed automatically, as shown in the following figure:
Figure2.18 Installing USB LINK
After successful installation, the user can check the information of TES-5680 USB LINK from “Device Manager”, as
shown in the following figure:
Figurer2.19 Information of USB LINK
25
