Tahoe 4681, User Manual

Page: 30 / 52

22
Tahoe 4681 (4-port G.shdsl.bis/FastEthernet modem card)
admin
– full access to the device
read-only
– permits only reading of the configuration and the statistics
user mode { single | multi }
– selects the working mode – to either single or multi-
user
ver
Displays current firmware version and compilation date.
vlan
The vlan command is used to manage VLAN configuration. The modem may work in one of
following modes:
transparent – the VLAN-tagged packets are passed transparently. The modem is transparent
to the traffic and it’s up to user to manage VLANs on external devices (default)
non-transparent – the modem may be set up to analyse the traffic and some packets may be
directed to specified interfaces, while others may be filtered. Also VLAN headers may be
removed or added while forwarding a packet, thus encapsulating a data stream from a speci-
fied interface into a VLAN.
The command has following syntax:
vlan show
– shows current settings
vlan transparent { on | off }
– enables or disables the transparent mode
vlan create < vid >
– inserts a new VLAN ID into the list of supported VLANs
vlan remove < vid >
– removes a VLAN ID from that list
vlan < vid > add < interface >
– adds an interface to a VLAN
vlan < vid > del < interface >
– removes an interface from a VLAN
vlan < vid > name < name >
– sets a VLAN name to ease identification
vlan < vid > { tag | untag } < interface >
– sets an interface as tagged or untagged.