Tahoe 4681, User Manual

Page: 25 / 52

17
Tahoe 4681 (4-port G.shdsl.bis/FastEthernet modem card)
prompt
By using the prompt command you may change the default Tahoe> prompt to any other text that
will help you identifying the device.
ps
Shows the processes list
quit
This command closes the configuration session and disconnects from the modem.
reboot
Reboots the modem.
All unsaved changes to the configuration will be lost.
route
The route command is similar to analogous Linux command. It is used to configure the IP
routing. The route alone shows the current routing table. It may be modified using following
options:
route add < address > < interface >
– adds the route to a specific host directly through
the interface (the station with this address has to be in the network directly connected to that
interface)
route add < address > gw < gateway >
– adds the route to a specific host through a gate-
way
route add -net
<
address
>
netmask
<
network mask
> <
interface
>
– adds the
route to a subnet with given address and network mask directly on the specified interface
route add -net < address > netmask < network mask > gw < gateway >
– adds the
route to a subnet with given address and network mask through the specified gateway
route add default gw < address >
– adds the default route through the specified gate-
way