Taga Harmony HTR-1000CD v.3, Instruction Manual

Page: 9 / 40

8
Remote Controller
Remote Controller Sensor
Remote Controller
5m
1. Prepare two AAA batteries (provided with this product).
2. Remove the rear battery cover by sliding it downwards.
3. Insert the batteries into the battery compartment. Carefully follow the polarity diagram inside
the battery compartment ( po and negative - symbols).
4. Reinstall the rear cover.
Battery Installation
• Always use AAA bateries and do not use the rechargeable batteries.
• If the batteries run out, remove the old batteries and replace them with new
ones within several minutes.
• If the batteries are placed incorrectly, thay can cause explosion.
• Remove the batteries if the remote controller is not used for a long period of
time.
• Do not handle and store the batteries together with metallic tools.
• KEEP AWAY FROM CHILDREN!
Operating range
Use the remote controller by aiming it at the remote controller sensor.
The remote controller can operate in the maximum range
of 5 meters away from the CD-Receiver and within 30 degrees
from the axis of the controller sensor.
Note! Exposing the remote controller sensor
to direct sunlight or strong light may cause faulty operation.
Batteries 2 3
4