Operation
Setting the Clock
Setting the Clock Manually
1. In the Standby mode, press and hold the
CLOCK
button to activate the Clock setting
mode, [CLOCK SET] will be displayed, then the time format [24] or [12] will blink.
2. Set the 12/24 hour format with the ►►
l
,
l
◄◄ buttons on the
front panel, or ►
l
,
l
◄ ;
VOL + / -
buttons on the remote controller.
3. Press the
CLOCK
button, the hour indicator will blink.
4. Set the hour with the ►►
l
,
l
◄◄
buttons on the
front panel, or ►
l
,
l
◄ ;
VOL + / -
buttons on the remote controller.
5. Press the
CLOCK
button, the minute indicator will blink.
6. Set the minute with the ►►
l
,
l
◄◄
buttons on the
front panel, or ►
l
,
l
◄ ;
VOL + / -
buttons on the remote controller.
7. Press the
CLOCK
button, the built-in clock starts operating.
Note!
• To exit the Clock setting mode without storing, press the button.
• If no button is pressed within 10 seconds, the CD-Receiver exits the Clock setting
mode automatically.
• If a power failure occurs or the CD-Receiver is disconnected from the electrical
outlet, the Clock setting will be lost.
Setting the Clock Automatically
When the CD-Receiver is tuned in the DAB/RDS station station, you can synchronize
with the time transmitted by the DAB/RDS station (with CT information).
Press the
INFO
button for over 2 seconds, [AUTO SYNC] will be displayed:
»
[CT SYNC] will be displayed after reading the DAB/RDS time.
»
If no time signal is received, [NO CT] will be displayed.
Display the Clock
In any Input mode, press the
CLOCK
button to display the time for a few seconds.
INPUT selection
By rotating the
INPUT
knob on the front panel or pressing the
INPUT
button or one of
the functions buttons on the remote controller, select which audio input (source) you
want to play.
Sequence of changes via the
INPUT
knob/button: DAB
→
DISC
→
USB
→
TUNER
→
BT
→
AUDIO IN
→
AUX
→
OPTICAL
Automatic Standby Mode
To save energy, if there is no audio signal on active input (source) for approximately 15
minutes, the CD-Receiver will automatically switch to the Normal Standby mode, and
then after some time to the ECO Power Standby mode.
Note!
In some cases this feature may not be activated.
18
Summary of Contents for HTR-1000CD v.3
Page 1: ...HTR 1000CD v 3 HYBRID STEREO CD RECEIVER Instruction Manual Edition 07 2023...
Page 2: ......
Page 40: ...39 Notes...
