14
Operation
Standby Mode
When you connect the Converter to the electrical outlet for the first time, it will start in the
Standby mode.
Turn ON – press once the Standby Button
Turn OFF – long press the Standby Button - Standby LED Indicator will be illuminated
Note!
The Converter will start in the last selected input before it was turned off (The USB
input is default for a new unit).
Input (Source) Selection
When the Converter is turned on.
Short press the Input (Source) Selector Button to select one of the inputs (sources):
COAXIAL, OPTICAL or USB.
The selected input (source) is indicated by an icon on the Display.
Display
• The Converter operates only with the supported file formats.
• The displayed sample rate is calculated by the internal clock engine and is accurate.
• Some external equipment may provide signal information to the Converter, even
when the playback is not active or paused, then the “NO SIGNAL” message will not
be displayed.
Summary of Contents for DA-400
Page 1: ...DA 400 DIGITAL TO ANALOG CONVERTER Instruction Manual Edition 08 2022 ...
Page 2: ......
Page 27: ...Notes ...
Page 28: ...Notes ...