Taga Harmony DA-400, Instruction Manual

Page: 17 / 28

Connecting a Computer to the USB port
16
Sound
Playback
Recording Sounds Communications
Select a playback device below to modify its settings:
OK Cancel Apply
Configure Properties Set Default
Speakers
DA-400
Default Device
If the “DA-400” is not selected then locate and highlight it and click “Set Default”.
To enjoy the best sound quality, we suggest to change a default format (bit and sample
rate) to the highest available.
Note! If there is a problem with the playback - lower the default format – right-click on
the “DA-400” device, choose Properties and then Advanced tab and change Default
Format.
Note! If there is any problem with recognizing the Converter by the computer disconnect
and reconnect the A-to-B USB 2.0 digital cable.
TAGA Harmony USB Audio Device control panel
(based on driver version 5.30.0)
• Launch the TAGA Harmony USB Audio
Device control panel from the icon or the
program menu.
• If the Converter is turned on and
connected to the computer, information
about the device status will be displayed.