Operations Manual
SV-2001-THS Computer
Document Number: 273-MNL-001
Page 30 of 58
Version A. 08/25/2010
6 Procedures
The procedures within this Chapter contain
relevant information to ensure your SV-2001-
THS Computer maintains its maximum
performance potential.
6.1 Computer Startup
1. Check to make sure that all the cables are
seated and connected correctly to the back of
the unit such as keyboard, mouse, monitor
video and power cables.
2. Press
ON
hard power
ON/OFF
switch at rear
of computer. (Figure 5.3).
3. Then Press the
power switch
ON to start the
computer (power switch is located in the front
of the unit). (Figure 5.2).
4. Once the unit starts, System will go thru Power
On self Test (POST) (no action is required at
this time).
5. Type in the
correct user name
and
password
and then press
enter
to login.
6. Once the operator is logged on they can use
the computer as they wish.
NOTE:
These instructions are assuming the
Computer is not connected to any network.
6.2 Computer Shutdown
1. Save any data that is needed and then close
application
2. Once all data is saved and applications are
closed it is now safe to shut down the
computer.
6.3 TAG Approved BIOS
The BIOS (basic input/output system) is the
program stored on the CMOS that the
Computer's microprocessor uses to get the
