HC- 30
HC-37
Battery Installation
SM-5016 uses 2 pieces of " AA " size batteries (Alkaline battery is
recommended ). To install or remove the batteries, press the release
buttons at the edges of the transmitter to open or close the cover as
illustrated below.
HC-30 Charger for the microphone, HC-37 for the belt transmitter
Handheld microphones and beltpack transmitters can be reloaded.The charger HC-30 is for the
handheld microphone SQ-5016. The charger HC-37 is for handheld microphone SM-5016.Before
loading check that the batteries are rechargeable ones.
10
ILLICO User’s Manual
ILLICO User’s Manual
11
BELT TRANSMITTER SM-5016
Belt transmitter settings
Press on Set for 2 seconds to enter into Settings.
1. Making changes to CHANNEL / FREQUENCY
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page. The
cursor will flash to allow changes to be made. Pressing UP or DOWN button
will increase or decrease the channel number. The corresponding frequency
will change accordingly. When a desired channel(frequency) is being selected,
it will be automatically saved and stored in the memory.
2. Input Level Gain Control Adjustment
Low impedance (Lo-Z) " MT" & high impedance (Hi-Z) " GT" gain controls are situated inside
the transmitter. Gain controls are adjustment ports that enable you touse microphones of diffe-
ring output levels and Guitar or instruments with Hi-Z output. To adjust microphone (Lo-Z)
input levels, turn the "MT" control and to adjust the Guitar or instrument (Hi-Z) input, adjust the
"GT" gain control to set the transmitter's desired audio input level.
3. Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page. Press SET for
about 2 seconds to activate the cursor. Press UP or DOWN button to move the
cursor to either NiMH (rechargeable battery) or AKLN (Alkaline battery)
position.When the desired option has been selected, press SET for about 2
seconds to save and store the data in the memory.
1. Antenna
2. Battery weak indicator
3. Audio mute switch
4. Mini-XLR connector
5. Power ON / OFF switch
6. LCD display
7. Charging port
8. Cover release button
9. Charging contacts
10. Lavalier microphone
11. Mic clip
12. SET
13. UP
14. DOWN
15. GT
16. MT
2
1
3
4
9
7
8
5
6
10
11
12
13
14
15 16
For rechargeable batteries we strongly recommend NiMH batteries, no alkanies.
Wrong batteries can damage the microphone functions. Check battery status. Many
batteries are known to have leakage problem of conductive and corrosive liquid.
Remove the batteries if you do not plan to use the belt transmitter for a few days.
Also check that transmitter and receiver are on the same channel.
L
L
CAUTION: BATTERY
PIED SPS 4
Hand crank tripod stand is delivered with a bag. Height: 1,25-2,05 m / 49.2-80.7“.
Max load: 70 kg / 154 lbs
