HDIT-108R Features
The data storage for the system comes from the fail-safe 54GB HDIT-108R,
(See Figure 2)
. The HDIT-108R is powered by a 300W auto-switching power
supply. Four hot-swap 18GB Ultra-Wide SCSI hard drives methodically stripe the
data. Should a hard drive fail within the HDIT-108R, the RAID controller will
seamlessly activate the “warm spare” drive. The defective hard drive should be
replaced as quickly as possible. Refer to page 4 for hot-swap hard drive replacement.
2000I-DP Features
The heart of the system is the 2000I-DP. Dual 850MHz Pentium III processors
and 512MB of RAM makes this low-profile server a powerful one. It is equipped
with a DAT backup device, a ZIP Drive, LS-120 Drive, Floppy Drive, CD-ROM, and a
PC Card Reader. All devices are easily accessable from the front panel.
Connecting HDIT-108R to the 2000I-DP
The 2000I-DP is connected to the HDIT-108R by the external SCSI connec-
tor,
(See Figure 19)
. The server connects to the left SCSI RAID connector. When
connecting the components of the system, make sure the connectors are well
seated in the port.
HDIT-108R
Rear Panel
The HDIT-108R connects to the 2000I-DP with the connectors located in the
center of the rear panel,
(See Figure 17)
. When connecting the HDIT-108R to the
2000I-DP, make sure the connectors are well seated in the port.
8
1
Figure 2
Figure 1
Figure 19
Figure 17
