TAGHeuer Timing
Page 16 / 20
Recommendations
4.
Although the Pocket Pro can be used indoors and outdoors, optimal viewing and
protection is best when the display is in the shade or covered from direct sunlight and rain
Never immerse the Pocket Pro in water
The Pocket Pro is developed to endure light rain.
The USB socket is protected by the black rubber, and prevents any water ingress
It is very important and recommended to keep the rubber in place at all times when not
using the USB connection
The optimal visibility of LCD is when the Pocket Pro is protected from direct sunlight
The Pocket Pro can overheat in excessive direct sunlight
The LCD Plexiglas is fragile. It is not recommended to clean it with a solvent or alcohol
IMPORTANT
A slightly damp cloth is recommended for cleaning the Pocket Pro
Download a new version of Firmware
5.
Program downloads and new releases of the TAG Heuer firmware “up loader” are
available free of charge on our website
www.tagheuer-timing.com
For this operation, you need to have:
•
Mini-USB cable HL545-3
•
The software «TAGHeuerFirmmanager.exe » version minimum V10.0
Procedure
•
Copy the software «TAGHeuerFirmManager.exe » onto your hard disk drive
•
Connect the Mini-USB cable (HL545-3) to the PC and to the Pocket Pro
•
Run the software « TAGHeuerFirmManager.exe »
•
Select the COM Port
•
Select the file: Update (HL400_xxx.dat)
•
Press START on the software
•
Press and hold the reset button on Pocket Pro and release when prompted
•
As soon as the upgrade is downloaded into the HL400, validate the software with OK
•
The HL400 is ready to use
