background image

- 1 -

AS-223

Staircase timer

with counter-blockade

Staircase timer AS-223 serves to keep switch-ON lighting of stair-

case, corridor, or any other object for the set time and to switch-

OFF this lighting automatically, upon elapse of this set time.

Turned ON staircase timer supports the lighting during set time 

by potentiometer (from 0.5 min. to 10 min.) and upon elapse of 

this set time a reduction by half of lighting brightness follows 

for about 30 seconds, after that OFF follows (thus an occurrence 

of a sudden darkness is avoided, enabling safe approach to the 

switch). After switching OFF the lighting there is possibility to 

switch it ON again. Function of counter blockade does not allow 

to keep the light-ON in case of staircase switch blocking (after 

blocking the pushbutton, for example by match, the timer will 

count the set time and switch OFF the lighting). Next switching 

ON can be after removing the blockade.

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and 

can give any amount to up to that end point of collec� on, as well as to store the occa-

sion of the purchase of new equipment (in accordance with the principle of old-for-

new, regardless of brand). Electro thrown in the trash or abandoned in nature, pose 

a threat to the environment and human health.

Summary of Contents for AS-223







Reviews: