7
4. HL 640-2 USB INTERFACE DRIVER SETUP
In order to download the ChronoSplit data on your PC, you have to
install the plug & play interface
drivers
and the download software.
Follow carefully the different steps described below and you’ll be able to analyze all the data you collected
during your trainings efficiently on a PC.
1. Plug the USB Interface in a USB port of your computer
The standard Windows plug & play wizard will detect the presence of the new unknown device and will ask
for the setup of the appropriate drivers.
The wizard will detect 4 devices.
1. Dual RS232
(FT2232C Channel A)
2. Dual RS232
(FT2232C Channel B)
3. USB Serial Port
4. USB Serial Port
2. Setup the drivers
You will have to
repeat 4 times
the procedure described below to install the 4 drivers.
Be careful to follow it step by step
.
The screenshots and the procedure described below are valid for Windows XP. On older versions of
Windows, the wizard windows are different but the process is mostly identical.
Device 1 : FT2232C Channel A
Select “No”
Click on “Next”
Select “Install from a list or specific
location (Advanced)
Click on “Next”
Summary of Contents for Chrono Split HL 640
Page 4: ...4...
