Taege Uni Drill, Owner'S Manual, Page: 6 / 13

6
13/10/2016
A Ground Breaking Company Since 1923
MAINTENANCE
Daily

Grease all grease points
Weekly

Check the tyne nuts and wheel nuts are tight

Check hitch points for wear. Replace when necessary.

Replace tynes if bent only by those recommended by the manufacturer.
STORAGE

Store in shed away from vehicle or pedestrian traffic.

Ensure machine is empty to eliminate rodent damage to rollers as this is not covered
by warranty.
Getting the drill ready the first
time

Attach the tractor to the drill using the tractor 3 point linkage.

Connect and plug in the drill power lead to the tractor 30amp auxiliary power supply.

Lift the drill and stow the stand in the working position.

Adjust the tractor top link so that the drill is level, and adjust the RH lower link arm so
that the drill is horizontally level and then lower the drill so that the tynes are on the
ground.

You are now ready to put seed/fertilizer into the hopper/s. Ensure that the wiring loom
is clear of the tractor linkages.