TROUBLESHOOTING GUIDE
his guide will assist in solving simple problems with the hot tub. If the problem cannot be solved using
e:
T
these procedures, contact your authorized Tadpole Hot Tub dealer.
Control panel displays an error messag
rred.
Solution:
See “Diagnostic Messages” for the particular Control System.
Cause:
An error has occu
Control pad and hot tub equipment do not operate:
Cause
#1:
No electrical power to hot tub.
Solution:
Turn on or reset the GFCI circuit breaker. If this does not solve the problem, have a qualified
ervice.
FCI breaker trips repeatedly:
Electrician check the electrical s
Cause #2:
The 20 or 30 AMP fuse, depending on the system, has blown.
Solution:
Contact your authorized Tadpole Hot Tub dealer.
G
per wiring to hot tub or GFCI breaker is defective.
ith a qualified Electrician.
onent on the hot tub.
ized Tadpole Hot Tub dealer.
ot tub pump turns off during operation:
Cause
#1:
Impro
Solution:
Consult w
Cause
#2:
There is a defective comp
Solution:
Contact your author
H
Cause
#1:
Automatic timer has completed its 30 or 120 minute cycle.
Solution:
Turn on the pump.
Cause #2:
Pump has overheated due to the vents on the equipment door being blocked.
Solution:
Clear items away from vents.
Cause #3:
The pump motor is defective.
Solution:
Contact your authorized Tadpole Hot Tub dealer.
ot tub will not heat:
H
Cause #1:
Slice valve is partially or fully closed.
Solution:
Open slice valve and secure with valve keeper.
Cause #2:
Thermostat has been turned down.
Solution:
Adjust thermostat to desired temperature.
Cause #3:
High limit sensor has tripped.
Solution:
Press any button to reset.
Cause #4:
Heating system is defective.
Solution:
Contact your authorized Tadpole Hot Tub dealer.
Tadpole Hot Tub Owner’s Manual
26
