JetPaks™
To identify a type of JetPak™, locate the identification numb
on the backside of the JetPak (e.g. J03-63-12).
This number
s the following information:
Style of JetPak (J03 = style number 03)
Water Flow Rate of JetPak (63 = 63 gallons per minute
Num
INTERCHANGING JetPaks™
1. Put the hot tub in Standby mode, this will prevent the pump(s) from
a tivating
2. Remove the headrest pillow.
3. Carefully
he SnapCap™ (top mounting plate) b
upwards with your hands.
4. P sh the
orward until you have enough room
the two P
s and air line union.
5.
isconne
on.
6. Loosen t
ns, pull the manifold out from in
8.
ch the
bove procedure
Important: H
s with two pumps have two differen
JetZones. These JetZones are divided by a JetZone divider
operate the h
the JetZone divider in place. Doing so will
caus seriou
e pumps. In addition, interchang
JetPaks™ from one JetZone to another may result in improp
flow one o
™. If you have questions or pro
plea
c
dpole Hot Tub dealer.
er found
provide
)
ber of Jets (12 = 12 jets)
c
(see the Operation section).
, remove t
y lifting
u
JetPak™ f
to reach
VC water union
ct the air line uni
D
he two PVC unio
between
the two water unions and remove the JetPak™ from the JetPod.
7. Exchange the
™ with another JetPak™.
JetPak
JetPaks™ by reverse the a
Reatta
.
ot tub model
t
. Never
ot tub without
s damage to th
e
ing
r water
e
to
se conta
r more JetPaks
t your authorized Ta
blems,
Tadpole Hot Tub Owner’s Manual
15
