background image

tado°  – Manual & Technical Documentation V1.1

9

Usage

The Extension Box has one mechanical button and one 
white LED that shines through the front housing. The 
LED pulses slowly during normal operation.

tado° Extension Box

The tado° Extension Box acts as a communication 
link between the tado° Smart Thermostat and the  
boiler. It replaces external controllers, external recei-
vers or is directly connected to the boiler.

The Extension Box is powered by a 230V mains 
connection for relays or by a low voltage power supply 
when connected to analog or digital interfaces. For 
potential free relay wiring, an additional two wire power 
supply cable maybe required which is provided by 
tado° upon request.

Extension Box

Please read the chapter “Installation” before installing.

!

Extension Box – Usage

LED Display

LED ACTION

MEANING

Off

No Power

Blinking

Connecting

Blinking (Fast)

Pairing

Pulsing (Slow)

Normal Operation

Pairing & Reset

During installation the Extension Box needs to be paired with the Bridge. The Exten- 
sion Box can be set into pairing mode by pressing the mechanical button for around 
4-5 seconds (until the LED starts blinking fast) and subsequently releasing it. The  
Extension Box automatically pairs with the Bridge. The LED willl start pulsing slowly 
when it has contacted our servers (normal operation).

The Extension Box can be reset by pressing the mechanical button for more than 8 
seconds until the LED turns off. The Extension Box then restarts when the button is 
released.

Summary of Contents for RU01

















Reviews: