Conference, Multiparty
46
FlexSet 120/280 User Guide
Display Message
Key LED
Conference, Multiparty
7098-7099
Conference calls allow several users to join a multiparty conversation. Up to 6
or 15 participants are permitted depending on the system hardware assigned to
the conference call. You may use any one of the following:
• Meet Me Conference • Conference Release • Group Calls (see
page 73
)
• Progressive Add-on • Lock
MEET-ME
To Join a Conference:
(at the assigned hour)
Dial assigned conference number 7098-7099 or press
[CONF#]
A N S W E R ( C O N F # )
O N
Note:
Warning tone is heard by all participants.
To leave a conference:
Press
[SPKR]
or hang up.
To force release an entire conference:
Press
[FORCED RELEASE]
(see
page 71
).
ADD-ON (while connected to a station/trunk)
To add on an additional participant to a progressive conference:
(while connected to a station/trunk)
1. Press
[XFER]
.
2. Press
[CONFERENCE#]
or dial assigned conference number 7098-7099.
A N S W E R ( C O N F # )
O N
3. Press
[SPKR]
or hang up to leave conference.
Note:
Warning tone is heard by all participants.
