System Registration and Deregistration
Page 2-2
Deregistration Both Hansets Individually Using the Base Unit
Handset 1
1.
Unplug Line 1 from the rear of the Base Unit.
2.
Set Base Unit DIP switches as follows:
DIP SWITCH-1 to OFF (up)
DIP SWITCH-2 to OFF (up)
DIP SWITCH-3 to ON (down)
3.
Plug Line 1 into the marked receptacle on the rear of the Base
Unit. The LED on the base will flash [Fast].
After 30 seconds, handset 1 will be deregistered.
4.
Turn all of the DIP SWITCH on the base unit to OFF (up).
Note:
The LED on the base will flash [Normally] when the unit comes
back to normal mode.
Handset 2
1.
Unplug Line 1 from the rear of the Base Unit.
2.
Set Base Unit DIP switches as follows:
DIP SWITCH-1 to ON (down)
DIP SWITCH-2 to OFF (up)
DIP SWITCH-3 to OFF (up)
3.
Plug Line 1 into the marked receptacle on the rear of the Base
Unit. The LED on the base will flash [Fast].
After 30 seconds, handset 2 will be deregistered.
4.
Turn all of the DIP SWITCH on the base unit to OFF (up).
Note:
The LED on the base will flash [Normally] when the unit comes
back to normal mode.
Summary of Contents for EMERALD ICE
