TAD TAD-M700, Owner'S Manual

Page: 14 / 112

14
BI-AMP Connection
[Example of BI-AMP connection using Speaker system with BI-AMP connection terminal]
( BALANCED )
INPUT L
( BALANCED )
SPEAKERS
ON
OFF
BI-AMP STEREO
L R
AUTO POWER DOWN
( BALANCED )
INPUT L
( BALANCED )
SPEAKERS
ON
OFF
BI-AMP STEREO
L R
AUTO POWER DOWN
INPUT R INPUT R
TAD-M700S TAD-M700S
High
Low
High
Low
+
−
+
−
TAD-M700S
R L
STEREO BI-AMP STEREO BI-AMP
To balance output terminal
To balance output terminal
Pre-Amplifier
Rear side of bi-wiring
compliant speakers
Rear side of bi-wiring
compliant speakers
BI-AMP connection is a method of connecting Low / high sound input terminals of speaker using 2 pair amplifier and
speaker cords.
Two TAD-M700S are required in BI-AMP connection.

Make sure that power supply switch of this apparatus and each component is not Turn ON while connection and
switching over of Switch.

Connect the speaker corresponding to BI-AMP at the time of connection. Moreover, set the BI-AMP switch to “BI-AMP”.

Connect High and Low of each speaker to respective power amplifier speaker terminal pair (SPEAKER L terminal and
SPEAKER R terminal).
CAUTION

Input signal is connected to 2 apparatus with input R terminal. Signal from input L terminal is not output to speaker at
the time of BI-AMP settings.
Note
It can be connected to either High or Low as same
signals are output from SPEAKER L and R.
CAUTION

To avoid harmful effects on amplifier while BI-AMP of
speakers, make sure to remove High-Low short metal
fittings attached to speaker. For details, refer to Speaker
Operating Manual.