Tacx NEO Bike Smart T8000, Manual

Page: 19 / 27

- 19 -
EN
3. Quick start guide
3d. Start training
The NEO Bike Smart can be controlled in various ways:
1. By software and applications
a. Tacx apps
i. Tacx Training app (iOS/Android)
ii. Tacx Desktop app (Mac/Windows)
b. Software of third parties
2. Stand alone
In this mode, the trainer is not connected to any software or app. You control the resistance by the
control buttons (C6) and various modes are available:
a. Simulation mode: based on inclination gradient
The virtual shifters (C8 and C9) are enabled.
b. Power(erg) mode: based power (wattage)
c. Resistance mode: based on 10 predefined resistance positions
Train with software
The NEO Bike Smart can be controlled automatically by the Tacx Training app, Tacx Desktop app and
that of third parties like Zwift and TrainerRoad.
To start riding with software, please take the following steps:
1. If required, plug the Smart bike into the wall socket.
Please note: there is no power switch.
2. Download and install the app and/or software you wish to use.
3. Enable ANT+ or Bluetooth, depending on which device and app you’re using.
4. Connect the trainer to your device. The device is connected if the ANT+ or Bluetooth indicator on
the display is shown.