23
Cleaning the Garment(s)
1 . A lint brush or roller may be used to remove particles on the inside
of the garment(s) .
2 . The outside portion of the garment(s) may be cleaned using a
damp cloth and a mild detergent .
3 . Allow garment(s) and accessories to dry thoroughly prior to using .
5.7
Disinfecting the Entre Plus System
DisCide® ULTRA Spray Disinfectant has been demonstrated to
effectively disinfect the Entre Plus system . Use DisCide ULTRA Spray
or similar disinfectant compliant with OSHA’s Bloodborne Pathogen
Standard (29 CFR 1910 .1030) and/or registered with EPA . To disinfect
the Entre Plus system, including garments, controller or accessories
between patient use, or if there are visible biological contaminants or
visible stains, the following steps are recommended:
1 . Clean any visible blood or body fluids from the surface of
the garment .
2 . Thoroughly wet surface with DisCide ULTRA Disinfecting Spray .
3 . Allow surfaces to remain wet for one minute and then allow
to air dry .
CAUTION
Follow instructions and warnings as issued by manufacturer of any
disinfecting product .