TacT Audio BOZ 2200, Owner'S Manual

Page: 61 / 68

61
communication menu
<
menu option
The Communications menu is used to specify how your Boz system sends and receives informa-
tion between a computer, a Tact TCS, or a TacT RCS 2..2X.
1. Use this field to set the BOZ-216 device address. This address is used by the PC program
to communicate with the BOZ-216 controller and the BOZ-2200 modules. The value of
this field can be set from 1 to 255.
2. This field displays the RS232 baud rate. This field can not be modified.
3. Place the cursor over this field and click to toggle between ENABLE and DISABLE. In
order to communicate with PC this field has to be set to ENABLE.
4. Place the cursor over this field and click on it to ENABLE/DISABLE TCS and RCS-2.2 X
volume control of the BOZ-216. If you have a TCS MKII or an RCS-2.2 X set this option to
ENABLE and connect TCS MKII/RCS-2.2 X RS232 AUX output to the BOZ-216 RS232 input.
In this way, your TCS MKII/RCS-2.2 X will take control over the BOZ-216 master volume.
When doing this make sure to set the AMP menu option in both TCS MKII and RCS-2.2 X
to “ENABLE”. If the TCS MKII or the RCS-2.2 X are not used this option should be set to
DISABLED.
Note: When the TCS MKII/RCS-2.2 X feature is set to “ENABLE”, IR control of the BOZ-216 is disabled.
When the TCS MKII/RCS-2.2 X feature is set to “DISABLE”, IR control of the BOZ-216 is enabled. If after
the TCS MKII/RCS-2.2 X feature is set to “ENABLE” you manually enable IR control by using the MAIN
MENU - OPTION menu, then the first transmitted control signal from the TSC MKII/RCS-2.2 X will
disable the BOZ-216 IR control.
.
th
e
M
E
N
U
o
p
tio
n