TacT Audio BOZ 2200, Owner'S Manual

Page: 15 / 68

15
boz - 216 front panel
1. Main power switch. Use this switch to turn the BOZ 216/2200 ON and OFF.
2. Mute button. Push this button to mute and un-mute entire system.
3. Standby button. Push this button to place the BOZ-216 into standby mode and to turn it back
on again. When in standby mode, all the BOZ-2200 modules are powered down. However, the
BOZ-216 will not be completely powered down. It will be placed into low power mode and
will still be able to receive some IR and RS232 commands.
4. Volume control knob.
5. Rotary control knob. Turn and push this knob to scroll through menu options, change system
parameters and select options.
6. Master level display. Displays the master level form 0.0, the minimum value, to 99.9, the maxi-
mum value.
7. Main display. All system menus are displayed here.
Before trying to access BOZ 216/2200 via your PC make sure that your system is properly con-
nected.
STANDBY mode:
All BOZ-2200 modules
are OFF, all outputs are
muted, and all displays
are off.
Volume control knob:
Controls the master
volume for amplifiers
in the selected group.
The selected group is
indicated in the front
panel display. To adjust
an individual ampli-
fier, or module’s level,
you need to access its
specific LEVEL menu.
See p. 44.
Rotary Control Knob:
Can be used to click
through all menu op-
tions. For instructions
please see p.33.
g
e
tti
n
g
st
a
rt
e
d