TacT Audio BOZ 2200, Owner'S Manual

Page: 21 / 68

21
1-STANDBY
The STANDBY button will turn the BOZ-216/2200 “ON” or it will place it into “STANDBY” mode. When
in standby mode, the unit is placed into a lower power “idling’ state.
2-DIGITAL
The DIGITAL button is not used with this unit.
3-ANALOG
The ANALOG button is not used with this unit.
4-CORRECTION block
The CORRECTION buttons are not used with this unit.
5-MENU
The MENU button will switch the front panel display from the status screen to the main menu
screen.
6-VIDEO
The VIDEO button is inactive with this unit.
7-UP
The UP navigational button is used to select menu options and/or to change their values.
8-DOWN
The LEFT navigational button is used to select menu options and/or to change their values.
9-LEFT
The LEFT navigational button is used to select menu options and/or to change their values.
10-RIGHT
The RIGHT navigational button is used to select menu options and/or to change their values.
11-ENTER
The ENTER button will select the menu option currently marked by the blinking cursor. It is also
used to enter an edited parameter.
12-VOLUME Block
The VOLUME block consists of three buttons.
The MUTE button will mute/un-mute all enabled channels.
The UP button will increase the master volume level.
The DOWN button will decrease the master volume level.
To use the remote
control, you must first
ENABLE IR Control.
This is done in the
OPTIONS menu. The
OPTIONS menu is
accessed from the First
Screen by selecting
the MENU option. For
more information on
the OPTIONS menu,
see p. 54.
Arrow Keys:
The navigational arrow
keys on the remote
correspond in func-
tionality to the Optical
Control Knob found on
the front panel of the
BOZ-216 control unit.
For detailed navigation
instructions, see p. 28.
g
e
tti
n
g
st
a
rt
e
d