background image

8

SAVE THESE INSTRUCTIONS

MAINTENANCE GUIDE

MAINTENANCE GUIDE

WARRANTY

The manufacturer warrants to the original purchaser that products manufactured are free

from defects of workmanship and material, provided such goods are installed, operated and

maintained in accordance with written manuals or other instructions for a period of 1 year

from date of purchase (five years on the tank only).  In case you, as our customer, meet any

trouble with your machine, contact your Powr-Flite

®

representative, who will be happy to be

of service to you and will take care of the warranty settlement.

NOTE: Alterations and changes made to the machine without written approval of the 

manufacturer and use of unapproved spare parts will not be covered by warranty.

Loss of Suction

CAUSE:

SOLUTION:

1) Tank Full

1) Empty Tank

2) Dry filter assembly clogged.

2) Clean cloth filter.

3) Clogged hose or wand.

3) Remove obstruction.

4) Tank rim is dented.

4) Replace tank.

5) Loose or broken fan.

5) Contact manufacturer of service center.

6) Motor not working.

6) Contact manufacturer or service center.

7) Float not functioning.

7) Check to see if float moves freely or tank is full.

8) Gasket worn.

8) Replace gasket.

Motor is not running

CAUSE:

SOLUTION:

1)Broken switch.

1) Contact manufacturer or service center.

2) Defective power cord.

2) Contact manufacturer or service center.

3) Defective motor.

3) Contact manufacturer or service center.

4) Blown fuse or tripped circuit breaker 

at power source

4) Contact manufacturer or service center.

Dust blowing from unit when running

CAUSE:

SOLUTION:

1) Full paper filter bag.

1) Replace filter bag.

2) Paper filter bag not installed properly or

2) Re-install or replace paper filter bag properly.

off inlet tube.

3) Cloth filter bag dirty.

3) Clean cloth filter bag.

4) Cloth or paper filter bag is torn.

4) Replace filter bag.

5) Paper bag is not installed.

5) Install paper filter bag, when vacuuming very

fine dust, chimney soot or sheet rock.

Water blowing from unit when running

CAUSE:

SOLUTION:

1) Tank is full of liquid.

1) Empty tank.

2) Sudsy or foamy liquid is being picked up.

2) Add defoamer to tank.

5

YEARS 

 on

Tank

1

YEAR on 

Vacuum

Motor

1

YEAR on 

Material & Our 

Workmanship

Summary of Contents for POWER-FLITE PF19SV









Reviews: