Embroidering
38
f
Press .
g
To return to the area in the pattern where you stopped
embroidering, follow steps
c
through
f
in the next
section.
■
If the thread breaks during embroidering
a
Press the “Start/Stop” button to stop the machine.
b
If the upper thread is broken, redo the upper
threading. If the bobbin thread is broken, press
and follow the directions in steps
a
through
f
from
the previous section to reset the bobbin.
c
Press .
d
Press
,
, or
to move the needle back the
correct number of stitches before the area where the
thread broke.
e
Press
to return to the original screen.
f
Press
(Presser foot lifter button) to lower the
presser foot, and press the “Start/Stop” button to
continue embroidering.
■
Resuming embroidery after turning off the
power
The current color and stitch number are saved when
embroidery is stopped. The next time the machine is
turned on, you have the option to continue or delete the
pattern.
Embroidery Foot Auto Down
You can choose a setting to automatically lower the
embroidery foot at the beginning of embroidering.
a
Press
to display the settings screen, and then
display page 3 by pressing
/
.
b
Set [Embroidery Foot Auto Down] to [ON].
1
When set to [ON], pressing the “Start/Stop” button when
the presser foot is raised automatically lowers the
presser foot before starting embroidering.
Memo
• If you cannot move back to the area where the
thread broke, press
to select the color and
move to the beginning position of that color, then
use ,
or
to move ahead to slightly
before where the thread broke.
1
