3.
Activate
‘Activation trend recording’ .
There are 4,650 data points available for each
parameter. When a longer recording is made, the
oldest data are continuously overwritten.
There are 3 types of recordings:
–
Recording interval long: Allows data to be
tracked over several days.
–
Recording interval short: Allows more exact data
to be tracked over several hours.
–
Recording in the event of a change (COV): Only
makes a recording when the parameter changes,
allowing recordings to be made over an extended
period.
The short and long recording intervals can be set by
means of the corresponding parameter settings on
the ‘Save/load’ page.
The trends cannot be displayed on the HMI. They
must be copied onto a USB stick to display them on a
computer. The trends are saved as a csv file.
Personnel:
n
Heating and sanitary technician
Material:
n
USB stick
1.
Log in on the HMI (
Appendix A.1 ‘Logging in/out’ on page
2.
Insert a USB stick.
3.
Open
‘System’ .
4.
Activate
‘Save trends to USB’ .
ð
The parameter is set to “Active”.
It can take several minutes to save the
data. The parameter is only reset to “Pas-
sive” when data saving is complete.
If a USB stick is left inserted, a copy of the
data is saved to the USB stick from the cir-
cuit board automatically once the time
defined in ‘Aut. trend saving interval’ has
expired.
Saving trends
H3000 E
Appendix for service personnel
01/2023
Item no. 215251
EA no. EA-1291
Operating instructions
50