3-ANTENNA ASSEMBLY
The dipoles and elements are match marked to the supporting crossarm.
The dipole insulators and parasitic elements mount to the same side of the
crossarm.
1. Next, starting with dipoles “C” assemble dipoles “C” and “D” to their
marked locations on the crossarm as shown in Figure 2.. Use the 1/4-20
x 2 1/4” hex head screws.
2. The feedlines connecting the dipoles “C” and “D” are attached as shown
in Figure 3 using the supplied feedline clamps and the #10-32 x 5/8” long
round head screws. The feedlines must have a center to center spacing of
3/4” as shown in Figure 3. Attach the feedlines to the top of the feedline
clamps. There must be bare metal to metal contact between the feedlines
and the dipoles.
FIGURE 1
FIGURE 3
2
FIGURE 2
