Taco Electronic Solutions iWorx HPU2, Installation Manual

Page: 13 / 16

iWorx® HPU Series
502-025, Effective: April 17, 2013 13
© 2013 Taco Electronic Solutions, Inc.
APPLICABLE DOCUMENTATION
REPRESENTATIONS AND WARRANTIES
This Document is subject to change from time to time at the sole discretion of Taco Electronic Solutions, Inc. All updates to
the Document are available at www.taco-hvac.com. When installing this product, it is the reader’s responsibility to ensure
that the latest version of the Document is being used.
iWorx® products shall only be used for the applications identified in the product specifications and for no other purposes.
For example, iWorx® products are not intended for use to support fire suppression systems, life support systems, critical
care applications, commercial aviation, nuclear facilities or any other applications where product failure could lead to injury
to person, loss of life, or catastrophic property damage and should not be used for such purposes.
Taco Electronic Solutions, Inc. will not be responsible for any product or part not installed or operated in conformity with the
Document and instructions or which has been subject to accident, disaster, neglect, misuse, misapplication, inadequate
operating environment, repair, attempted repair, modification or alteration, or other abuse. For further information, please
refer to the last page of this Document for the company’s Limited Warranty Statement, which is also issued with the product
or available at www.taco-hvac.com.
Notes:
Description Audience Purpose
iWorx® HPU2 Application
Guide
, Document No. 505-025
iWorx® HPU3 Application
Guide
, Document No. 505-035
– Application Engineers
– Wholesalers
– Contractors
– Start-up Technicians
– End user Provides instructions for setting up and using the iWorx®
HPU2 and HPU3.
iWorx® LHP2 Application
Guide
, Document No. 505-024
– Application Engineers
– Wholesalers
– Contractors
– Start-up Technicians
– End user Provides instructions for setting up and using the iWorx® LHP
controller.
iWorx® LCI2 Application
Guide
, Document No. 505-002
iWorx® LCI3 Application
Guide
, Document No. 505-050
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides instructions for setting up and using the iWorx® Local
Control Interface.
www.iWorxWizard.com – Application Engineers
– Wholesalers
– Contractors An on-line configuration and submittal package generator
based on user input. Automatically generates bill of materials,
sequence of operations, flow diagrams, wiring diagrams,
points and specifications.
Additional Documentation LonWorks FTT-10A Free Topology Transceiver User’s Guide, published by Echelon Cor-
poration. It provides specifications and user instructions for the FTT-10A Free Topology
Transceiver. See also: www.echelon.com/support/documentation/manuals/transceivers.