background image

 

5. USE AND MAINTENANCE

 

 

This plancha has been designed to function with butane (6kg of bottles of gas ONLY) 
controlled by an approved 28mbar butane regulator, or propane (5kg bottles of gas 
ONLY) controlled by an approved 37mbar propane regulator. 
 
Never use adjustable regulator with this plancha. Propane cylinders are recommended to 
use for all year round, even in winter. 
 
Butane cylinders can be used in summer and should not be used at low temperature. 
 
Do not store and use gas cylinders horizontally. 
 
It is advised that you do not use a gas mixing system, and the regulator must be used 
according to national laws and regulations of the country of destination. 
 
The appliance is designed to operate with a cylinder of Max. size    Ø31.8 x 58 cm. 
 
A REGULATOR AND AN APPROPRIATE BOTTLE OF GAS ARE ESSENTIAL TO 
ENSURE THE PLANCHA FUNCTIONS EFFECTIVELY AND WITHOUT RISK. USING 
AN INAPPROPIATE OR DEFECTIVE REGULATOR IS DANGEROUS AND NULLIFIES 
OUR WARRANTY. 
 
Consult your local gas retailer to obtain an appropriate gas bottle. 
 

Install the plancha in accordance with national laws and regulations.

 

 

This plancha is designed for outdoor use only and in well-ventilated place. Never use it 
indoors, in a confined area or in basement. 
 
Never place it on a flammable surface. The distance between the floor, the surrounding 
walls and other structures must be a minimum of 1 metre away. 
 
There must be no ceiling above the cooking plate. 

 
     

CET KEEP THE PLANCHA AWAY FROM ANY INFLAMMABLE SUBSTANCES DURING 

USE. 

Summary of Contents for SRGG21706

















Reviews: