6
- NOTICE
·DISCONNECT FROM POWER SUPPLY WHEN CARRYING OUT ANY
MAINTENANCE.
CLEAN
1. DO NOT-SPRAY OR SPLASH FLUIDS OVER MACHINE.
2. DO NOT-REMOVE OR ADJUST THE FACTORY PRESET PEEL PLATE.
3. DO-KEEP ALL SURFACES CLEAN.
SPECIALLY CLEAN UNDER THE PRESS POLY-URETHAN.
LABEL
4. IT SHOULD HAVE THE GAP BETWEEN THE LABELS.
5. IT SHOULD NOT HAVE CUT LINE IN BACKING PAPER.
6. LABEL ROLL SHOULD BE LESS THEN Φ250MM.
MAXIMUM OF LABEL SIZE IS 20(W) X 40(L)MM
MINIMUM OF LABEL SIZE IS 10(W) X 20(L)MM
7. USE PROPER VOLTAGE WHICH IS MARKED IN THE LABEL OF MACHINE.
8. THE FUSE SHOULD BE 0.5A.
