SECTION 1 – CAUTION AND SPECIFICATIONS
1)
BEFORE OPERATING THE MACHINE, READ THE COMPLETE OPERATOR’S MANUAL.
2)
NEVER HAVE THE POWER CORD OF THIS MACHINE PLUGGED INTO AN OUTLET WHEN
ANY OF THE COVERS OF THIS MACHINE HAVE BEEN REMOVED.
3)
INSTALL AND OPERATE THIS MACHINE ONLY ON A FLAT, LEVEL, AND DRY SURFACE.
4)
USE ONLY THE SPECIFIED ELECTRICAL POWER INPUT WITH THIS MACHINE.
5)
ALWAYS TURN THE POWER OFF AND UNPLUG MACHINE PRIOR TO CLEARING ANY
TAPE OR TAPE JAMS FROM THE MACHINE, PARTICULARLY IN THE AREA OF THE
CUTTER.
6)
ALWAYS KEEP HANDS, CLOTHING, JEWELRY, AND HAIR AWAY FROM ALL MOVING
PARTS OF THE MACHINE.
7)
THIS MACHINE HAS A VERY SHARP CUTTER ASSEMBLY, NEVER PUT HAND OR ANY
OTHER PART OF THE BODY, OR ANY ITEM INTO THE CUTTING OPENING UNLESS THE
MACHINE IS OFF AND THE POWER HAS BEEN UNPLUGGED.
8)
NEVER OPERATE THIS MACHINE WITH ANY OF THE SAFETY COVERS OR DEVICES
REMOVED.
9)
KEEP THIS MACHINE CLEAN AND DRY AT ALL TIMES.
10)
SERVICE ON THIS MACHINE SHOULD ONLY BE PERFORMED BY FACTORY TRAINED
AUTHORIZED SERVICE PERSONNEL.
11)
NEVER USE THIS MACHINE FOR OTHER THAN ITS INTENDED APPLICATIONS. USE OF
THE MACHINE ON UNINTENDED APPLICATIONS CAN CAUSE HARM TO THE OPERATOR,
THE MACHINE, AND TO THE PRODUCT. PLEASE CONTACT THE MANUFACTURER IF
THERE ARE ANY QUESTIONS TO WHETHER THIS MACHINE CAN BE USED FOR A
PARTICULAR
APPLICATION.
SPECIFICATIONS:
MACHINE LENGTH: 10” , WIDTH: 5 3/4”, HEIGHT: 6 1/2”, WEIGHT: 9 1/2 LBS
POWER: 110 VOLT (60 mhz)
CORE SIZE: 3”
MAXIMUM WIDTH OF TAPE: 2”
MAXIMUM DIAMETER OF TAPE ROLL: 6”
MAXIMUM LENGTH OF TAPE FED IS: 39” (999 mm)
MINIMUM LENGTH OF TAPE FED IS: 3/4” (18 mm)
