manualshive.com logo in svg

Tabuchi Electric THD-S55P3B-US, User Manual, Page: 60 / 60

Share
Download
Tabuchi Electric THD-S55P3B-US User Manual Download Page 60

User’s Manual

Hybrid Solar Inverter (5.5 kW, Outdoor)

THD-S55P3B-US

•Read this User’s Manual carefully to ensure safe use of this 

product.

•Completely familiarize yourself especially with the “Safety 

Precautions” (Pages 4 to 5) before using this product.

•Keep this User’s Manual in a safe handy place for future 

reference.

Thank you for purchasing this product from Tabuchi Electric.

Modes and Mechanisms … 8

Quick Reference Guide

Grid-tied Operation … 16

Stand-alone Operation … 20

Troubleshooting … 53

DOC01-DS1613-AJ

Tabuchi Electric Co., Ltd.

Notes

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and usedin accordance with 
the instruction manual, may cause harmful interference to radio communications.Operation of this equipment 
in a residential area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense.

Summary of Contents for THD-S55P3B-US





























































Reviews:

No comments