Tabuchi Electric THD-S55P3B-US User Manual Download Page 16

Grid-tied Operation

16

17

Daily Operation

*1. Daytime and nighttime hours must be set when installing the inverter.
*2. The emergency backup charge is not discharged.
*3. Battery discharging stops when the amount of sunlight increases and power is sold to the power company.
*4. The storage batteries are charged whenever the emergency backup charge is low.

*5. The storage batteries do not charge further once full.
*6. Surplus solar power that cannot be stored in the power batteries is sold.
*7. Even while the storage batteries are discharging power, 0.2 kW or more power is purchased from the power company.
*8. Even while solar power is used to charge the storage batteries, power is sold and purchased according to power consumption in the home.
 

The storage batteries are fully charged during 
the nighttime hours. *1, 4

Time of Day

MAX POWER

EXPORT Mode

Remote Controller (Example)

Remote Controller (Example)

Once the storage batteries are full, 
charging/discharging is stopped until the 
daytime hours. *1, 4

If there is an insufficient amount of sunlight and 
the storage batteries are low, 
charging/discharging is stopped. *2, 4

ECONOMY

Mode

Remote Controller (Example)

The storage batteries are charged until full 
regardless of the time of day or the amount of 
sunlight. *8

HOME BACKUP

Mode

 (Initial mode)

Remote Controller (Example)

If the amount of sunlight increases, surplus solar 
power is used to charge the storage batteries. 
*4, 5, 6, 8

Remote Controller (Example)

The storage batteries are discharged to supplement 

power shortages (when power is purchased from the 

power company) during the daytime hours up until 

the nighttime hours begin. *1, 2, 3, 4, 7

Remote Controller (Example)

If the storage batteries run low, 
charging/discharging is stopped until the 
nighttime hours. *1, 2, 4

Remote Controller (Example)

The storage batteries are discharged to 
supplement power shortages (when power is 
purchased from the power company). *2, 3, 4, 7

Remote Controller (Example)

Though the storage batteries are full, 
charging/discharging is stopped as a safeguard 
against power outages on the commercial power grid.

Remote Controller (Example)

If there is an insufficient amount of sunlight and 
the storage batteries are low, 
charging/discharging is stopped. *2, 4

Remote Controller (Example)

Night

Morning

If there is an insufficient amount of sunlight, 
charging/discharging is stopped. *2, 4

PEAK CUT Mode

Remote Controller (Example)

Remote Controller (Example)

The storage batteries are discharged to 
supplement power shortages (Discharges in 
order to cut peak). *2, 3, 4, 7

If the amount of sunlight increases, surplus solar 
power is used to charge the storage batteries. 
*4, 5, 6, 8

Remote Controller (Example)

The storage batteries are discharged to 
supplement power shortages (Discharges in 
order to cut peak). *2, 3, 4, 7

Remote Controller (Example)

Daytime

Evening

Summary of Contents for THD-S55P3B-US





























































Reviews: