Product Installation
6
5.Installation and disassembly of rolling brush cover
5.1 Installation of the rolling brush cover: press down the protrusion corresponding to
the notch of the rolling brush cover and it is successfully installed after hearing the click
sound (as shown in Figure 1).
5.2 Disassembly of the rolling brush cover: press the center of the button on the front
rolling brush cover, the rolling brush cover will automatically pop up and take out the
rolling brush cover (as shown in Figure 2).
5.3 The installation and disassembly of the front and rear covers of the rolling brush are
consistent.
6.Installation and disassembly of rolling brush assembly
6.1 Installation of rolling brush assembly: hold the handle of the rolling brush by hand,
firstly align the right end of the rolling brush with the rolling brush shaft, then put the left
handle of the rolling brush into the groove, and then install the rolling brush cover (as
shown in Figure 1).
6.2 Disassembly of rolling brush assembly: firstly remove the rolling brush cover, then
pull up the left rolling brush handle by hand, and then pull it out to the left to remove it
(as shown in Figure 2).
6.3 The installation and disassembly of the rolling brush are consistent.
6.4 Rolling brush A is correspondingly installed to the letter A side of the floor brush,
and rolling brush B is correspondingly installed to the letter B side of the floor brush.
Click