10
5.Dump the dirty-water tank
5.1 Hold down the button for disassembling the dirty-water tank and remove the dirty-water
tank. (as shown in Figure 1)
5.2 Hold the handle of the dirty-water tank with one hand, and gently pull out the dirty-water
tank cover with the other hand. (as shown in Figure 2)
5.3 After the sewage is poured out, install the dirty-water tank back to the machine body, and it
is successfully installed after hearing the click sound.
How to Use
tank cover
1
2
6.Charging and self-cleaning
Lift the machine vertically, put it into the charging base, and hear the voice prompt
“Charging”, which means that it is in place.
1) Put the floor scrubber into the charging base for charging, and ensure that there is more
clean water in the clean-water tank. Press the self-cleaning button at the top of the handle to
start self-cleaning, which takes about 80 seconds.
Tips:
1. The “self-cleaning function” can only be selected when it is under charging.
2. To avoid odor, please clean the dirty tank after use and place the roller brush on the charging
dock to dry.
3. It is recommended to
self-clean after each use.
